Somers, WI - Kenosha County
Garage Floor Coating in Somers, WI
From brand-new subdivision slabs near Parkside to forty-year-old shop floors on farm parcels - one crew, one diamond-ground system, matched to whichever Somers floor you own.
We install garage floor coatings throughout Somers, WI - a diamond-ground flake system on a polyurea base with a polyaspartic topcoat, built in one day, for everything from new attached garages near UW-Parkside to older shops and outbuildings on the township's farm parcels. Somers is really two floor populations wearing one zip code, and the right prep depends on which one is in front of us. Both end at the same place: a sealed floor that road salt and freeze-thaw cannot get into.
Two kinds of Somers slabs
The east side of Somers, around the university and the newer subdivisions off Highway E, runs young: attached two- and three-car garages on concrete that is often sound and mostly needs curing residues ground off before it can take a coating. Head west and the picture changes to established properties and working parcels, where the garage might be a 1970s detached two-car or a shop building with a slab that has carried tractors, trucks, and thirty winters of drips. Older floors get the fuller treatment: moisture checked, cracks chased and filled, pitted areas patched, oil staining ground out. Two starting points, one finish - the system itself is the one we detail on our garage floor coating page.
Floors we handle around Somers
- Garage floor coating - grind, repair, base, flake, topcoat in one day
- Epoxy garage floor - the flake look on a build that outlasts epoxy
- Polyaspartic garage floor coating - the fast-cure, salt-stable finish
- Garage floor repair - crack chasing, spall patching, resurfacing
- Commercial floor coating - shop, outbuilding, and business floors
- Garage floor cost - the factors that move a quote, explained honestly
Got a Somers slab that needs reading?
New build or old shop floor - we measure it on site and quote it free, no pressure.
Shops, sheds, and pole barns
Somers properties come with more outbuildings per household than anywhere east of it in the county, and an outbuilding slab is its own animal. Many were poured for equipment, not looks - rougher finishes, sometimes no vapor barrier underneath, often years of hydraulic and motor oil soaked into the parking spots. That does not rule out a coating; it changes the prep. Contaminated areas get ground deeper, moisture gets tested rather than assumed, and unheated buildings get scheduled for slab temperatures that let the chemistry cure properly. A coated shop floor pays for the trouble: it stops dusting onto your tools, wipes clean after winter projects, and brightens a dim building noticeably. Bigger operations run through our commercial floor coating service.
Between two salt belts
Somers sits sandwiched between I-94 on the west and Sheridan Road on the east, with Highway E and Highway 31 carrying the daily traffic between them - all of it brined from November through March. Whatever route your household drives, the salt comes home and melts off onto the garage slab, and bare concrete drinks it. That is why the tire paths on an uncoated Somers floor go rough years before the rest of the slab. The polyaspartic topcoat ends the absorption: brine puddles sit on the surface, get squeegeed out, and take their chlorides with them. What that protection involves for your specific floor - size, condition, repair scope - is measured at a free on-site visit, and the honest factor breakdown is on our garage floor cost page.
Somers garage floor FAQs
Can you coat the floor of a detached shop or outbuilding on a Somers property?
Yes, and it is some of our favorite work. Older outbuilding slabs need a harder look first - many were poured decades ago, some without vapor barriers, and a few carry old oil staining from equipment. We grind, test, and repair accordingly. An unheated building also shifts the install window toward warmer months or temporary heat, which we sort out at the visit.
My Somers home is new construction - how soon can the garage slab be coated?
Fresh concrete needs to finish curing before a coating goes on - roughly a month at minimum, and we confirm with a moisture check rather than the calendar alone. After that, coating a young slab early is the cheapest prep you will ever get: little repair, and the floor never starts the salt decline in the first place.
Do you serve both the village and the older rural parts of Somers?
All of it. The newer subdivisions off Highway E and near UW-Parkside, the established streets down toward the Kenosha line, and the farm properties along the west side. Same crew, same system, free on-site quote everywhere - our installers are licensed and insured.
Free On-Site Quote
Get your free, on-site quote.
Tell us about your floor and we'll call you back the same day to set up a free measure and price.